The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. The unit operates at 48kHz and 96kHz and network connection may be copper and/or fibre and is PoE enabled.
The DIO816AES is an inexpensive way to get your AES audio into and out of the Dante or AES67 network. The unit has eight stereo AES inputs and eight stereo AES outputs with remote network level control. It can handle multiple sample rates and includes a secondary port for Dante Redundancy or a switch output.
The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices.
The DMIX30 is a Dante enabled mixer which includes six discreet five into one mixers. All audio inputs and outputs are assignable via the Dante network and have adjustable gain from off to +12dB. Additional gain of +20dB may be switched to each input allowing a maximum of +44dB gain. All mixers include a switchable limiter with threshold adjustment.
The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control.
The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network.
In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs.
Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.
The FWD8000 is a Dante enabled four wire box with eight four wire inputs, eight four wire outputs plus eight IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections four of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet.
The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs.
The DS10 Audio network bridge interfaces between Dante networks and AES3 digital audio signals, while also providing distribution of Ethernet control data
The d&b DS100 Signal Engine is a specialized rack-mount 3 RU audio processor with Audinate Dante networking. It provides a 64 x 64 audio matrix with level and delay adjustments at all cross points.The comprehensive input processing provides gain, EQ, delay, and polarity switches, enabling the user to combine all types of input signals to create a mix from a wide variety of sources. Extended processing capabilities are also provided on every output. Two optional software modules provide dynamic object-based positioning and emulated acoustics functions.
The DAD AX32 allows no-compromise audio recording, mastering, post production, and future-proof archiving A new feature is the inclusion of IP audio capabilities handling up to 512 channels on a 10
The DAD DX32 is a versatile digital audio bridge and router interface designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distributio
The U9110 Headset Station provides software-enabled access to the Digital Intercom System and its connectivity to two-way radios, other ancillaries and existing networks
The U9120-W4 Wireless Gateway is a relay for all audio interface between Wireless Belt Station users and the U9100 Master Station and connected ancillaries (two-way radio, IP networks, etc.)
The DELEC Desk 16 Dante is a 16-key desktop subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.
The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.
The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck.
The DELEC Talk 12 X Dante is a 12-key rackmount subscriber panel with individual rotary encoders equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.
The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor.
The unito NAM 203 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.
The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.
The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP.
The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card.
The unito NIO 0800 provides bidirectional format conversion of AES/EBU audio to and from Dante. The NIO 0800 offers 8 AES inputs and outputs and uses RJ45 for high density, easy to use connections.
The unito NIO 1212 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1212 offers 12 AES and 12 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.
The unito NIO 1624 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1624 offers 16 AES and 24 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies.
Phantom Reactor Custom is a 2-way active loudspeaker, specifically engineered to provide unique experiences in custom whole home audio and commercial spaces. Embedding professional features such as Dante and analog/AES input. Phantom Reactor Custom was made to fulfill audio professionals technical requirements.
The 52/MX takes audio mixing to a totally new level in flexibility. There are many different control modules available – just pick what you need for your application.
The 52/SX is a modular compact mixing console for radio and TV. The price-optimised mixer is ideal for On-Air studios, audio workstations and smaller OB vans.
The 52/XS2 core is the compact DSP unit for small studios and journalist desks. A built-in 4ch/4ch Dante interface is the solution for simple playout and recording tasks, monitoring or talkback.
At the heart of the system is the 4REA4 processing engine with DiGiCo connectivity options and powerful 4REA4 control software, providing routing, processing and mix control that allows your performance area to expand across your installation.
